Overview of the high-quality Universal Testing Machine of Testone

Testone is one of the leading manufacturer of testing instruments. With tech engineers who have accumulated more than 20 years of accumulated technology. We've been developing new products and developing new products.

All testone series load frames are designed to provide higher stiffness and precise alignment for testing everything from medical devices to high-strength composites. Rigid mechanical design ensures the best possible conditions for repeatable test condition and reliable results.

Universal Testing Machine – Mechanical 2 Pole (Model TO-102)

Endeavors defiance and hot passion in research and development and will require to customer by the best product.

Features

·         Universal Testing Machine is a representative test equipment for physical properties. It is capable of measuring load, strength, elongation of products or materials such as rubber, film, plastic, metal, etc.

·         Basically, Tests of fullering, tearing, compression, flexural, desquamation are available. Hardness (ILD, IFD), static load, repeat fatigue tests, the friction coefficient measurement test are also available.

·         There are largely two universal testing machine; mechanical machine and hydraulic machine. The major part of mechanical universal testing machine such as servo motor, gear, and ball screw is constructed from foreign-made (Japan). So, it has precision and low noise. Hydraulic universal testing machine realized the excellent reproducibility and accuracy by adopting a hydraulic servo system.

Combination Environmental Chamber - Model TO-5000CE

Features

·         Various of materials and products, test of infrared, Isothermal-Is humidity test, heat-resisting property, light-stability and durability

·         Main Body
Using the SUS304 polishing plate, high durability is guaranteed, also it has elegance appearance which is treated by Powder Coating at Steel Plate

·         Control System
Using Microprocessor program controller, this tester can set up diversity of the test-condition and It is able to be accurate control and user can choose Touch Control method, Program Control method , Computer Control method and etc.

·         Order Made
Users can change some details such as test material and form also user can choose the size of the products, mode of the regulator, the sensor for quantity and recorder

Specification

·         Inside dimension (mm) - 2000×2000×2000 (W×D×H)

·         Capacity (ℓ) - 8000ℓ

·         Outside dimension (mm) - 2700×2280×2850 (W×D×H)

·         Temperature range - -40℃∼150℃

·         Humidity range - 40% ～ 95%

·         Temperature & Humidity accuracy - ±1.0℃ / ±3.0%

·         Temperature & Humidity controller - Digital P.I.D program controller

·         (Touch screen type)

·         Temperature & Humidity sensors - Pt. 100Ω 0.1 Grade

Are you looking for Universal testing machine manufacturer in Korea? TESTONE CO.,LTD one of the leading Testing instruments manufacturer in Korea offers several type of testing chambers like Combination Environmental Chamber, Temperature & Humidity Chamber, Furnace, Water Bath, Thermal Shock Chamber, Forced Convection Drying Oven, Aging Tester, Weather/Fade Meter and so on. For more details contact testone@testone.co.kr

Ensure tensile strength and compressive strength of materials with Universal Testing Machine

Testone, the professional material testing machine manufacturer in South Korea, offers wide range of universal testing machine for checking tensile strength and compressive strength of materials.

Universal Testing Machine

It is a test equipment for physical properties Measuring Load, Strength, Elongation etc. With a high-performance LCD indicator that has the position control function, this machine was designed as a high-resolution (1/50000), and it is possible to control distance to 0.01mm.

Model: TO-101/TO-102 Feature

All TESTONE series load frames are designed to provide higher stiffness and precise alignment for testing everything from medical devices to high-strength composites. Rigid mechanical design ensures the best possible conditions for repeatable test condition and reliable results.

Superior stiffness

The stiff load-frame profile and generous connecting surface of the test machines reduce the inclination angle of the crosshead under load, enabling very precise alignment and application of force to the specimen. This is advantageous for flexure tests, compression tests, precision test on components etc.

Easy accessibility

Easier access to the test area is a very important benefit for the operator. When testing large metal specimens, fasteners, or composite parts, operators often struggle to reach the test area of large frames in order to load a specimen. Testone frames are designed with a lower base height that allow the operator to stand closer to the grips and fixtures, reducing the need to hold heavy test specimens away from the body.

Built for diversity

With an environmental chamber, materials tests in constant temperature and humidity, low or high temperature are possible.

Variety of grips

Systems can be equipped with a variety of grips, fixtures, environmental chambers and temperature controlled baths to accommodate a wide range of testing requirements. For more accurate strain measurements, extensometers or accessory can be added to any TESTONE testing System.

• Digital Display of force, displacement, cell capacity, speed, position, mode, unit etc.
• High-speed, low vibration & noise, Japanese made AC servo motor and Real time graphic display with multiple axis selection, auto scaling etc.
• Manual control of crosshead with all functions.
• Fully digital testing system with high precision control and accuracy, includes automated computer control of test methods.
• Crosshead guidance system providing precise alignment and smooth running.
• All testing systems include choice of load cell
• Self-diagnostics expedite troubleshooting and minimize downtime.

If you are looking out for material testing instruments manufacturer? Contact TESTONE, the leading plastic testing instruments manufacturer, delivers several universal testing machine, test chamber, testing machine for metal, rubber, film/plastic, textile, paint/pigments, and so on. For more details mail to testone@testone.co.kr

Testone offers Wheelchair and Toy Durability Testing Machine

Testone, the professional testing machine manufacturer in South Korea since 2011. We offer various industrial testing instruments to ensure the durability of the product and aims to deliver high quality products to the customers.

Wheelchairs Durability Testing Machine

Model: TO-D102

This tester is a device to test the durability of the driving electric wheelchairs and medical scooters. - This testing machine is measuring the static and fatigue strength test

Specification

·         Resistance test of Armrest declining Load

o   Load: 25 N ∼ 760 N /

o   Load pad: 50 x 50 x R100 ± 3

o   Diameter 50 x R100 ± 3

o   Ladder type support: 15° angle

o   Support distance: 700mm

·         Resistance test of Foot plate declining Load

o   Load: 250 N ∼ 1000 N (within) / Weight pad

o   Weight pad/ load support

o   Bend back lever test

o   Test doll: 100kg, 75kg, 50kg / Foot piece: 3.5 ± 0.5kg

o   Load: 345 ∼ 750 N

·         Resistance test of Armrest rising Load

o   Width 50mm: 10° vertical angle test

o   Hang weight 335 N ∼ 895 N (within) / Scale fixture

·         Resistance test of Foot plate rising load

o   Width 50mm

o   Hang weight 165 N ∼ 880 N (within)

o   Scale fixture

·         Resistance test of Push handle rising load

o   Width 50mm

o   Hang weight 330 N ∼ 880 N (within)

o   Scale fixture

·         Durability test

o   Changeable position, Air pressure, 60,000 cycle (under 0.5Hz)

Toy Durability Testing Machine

- This tester is for evaluating durability of the joint and the rotary part of toy.

- The joint and rotator endurance test and fracture test can be operated.

- It is easy to acquire and analyze the data using the private Software.

Specification

·         Torque - 1kgf.cm /100kgf. cm

·         Number of test - 1,000,000 cycle

·         Test methods - Joint ports durability / Joint parts destruction

·         Main Body - Al-Profile Case

·         Driving System - AC servo Motor System, AC Servo Motor & Reducer (Japan)

·         Control - Motion Control, Software, Angle control, torque control

·         Computer System - (monitor, Main body) 19” Rack STD

·         Safety Device - Emergency Stop, Limit (Torque, Angle), Power Breaker

·         Power - AC200V, 60Hz

·         Grip - Order production

If you are looking for universal testing machine & combination environmental chamber? Contact testone@testone.co.kr / oversea1@testone.co.kr, we offer wide range of testing machines.

Testone Offers Car Handle & Clutch-Pack Durability Testing Machine

Testone, the leading testing machine manufacturer in South Korea offers wide range of industrial purpose testing instruments to ensure the durability of the product.

Environmental Car Handle Testing Machine

This tester is to evaluate the environmental durability of the car door Handle. - The high-accuracy and high-durability are adopted a servo motor drive system. - A data acquisition and analysis are facilitated by using a dedicated Software.

Specification

·         Number of test - 1,000,000 cycle

·         Test methods - Door pull test, sliding test, sliding malfunction test, Pulling malfunction test

·         Main Body - Steel Case

·         Driving System - AC Servo Motor System, AC Servo Motor & Reducer (Japan), Ball Screw (Japan) Type

·         Control - Motion Control, Software, Displacement control, Load control, Timer, count, Load, Distance & etc.

·         Load control -Load Cell, Displacement control-Servo –Servo motor Encoder (or potentiometer, Proximity sensor & etc.

·         Computer System - (Monitor, Main body) 19”Rack STD

·         Operation Temp - -40℃ ~ 120℃

·         Operation Humidity - 30 ~ 95 %

·         Safety Device - Emergency Stop, Limit (Load, Stroke), Power Breaker

·         Power - AC200V, 60Hz

·         Load Cell - 100kgf 5 EA

Clutch-Pack Durability Testing Machine

The tester is a high performance device designed to test the clutch durability by implementing a high response speed and adopting the hydraulic valve is a device capable of high-speed test.

Controlled by computer and can be a variety of tests to reference the various waveforms. Feedback Control method in a precise static tests, dynamic tests are available, and the user of the computer-controlled Safety and ease of use, precision, designed to increase durability

Specification

·         Test Chamber - Material: SUS304

·         Temp. Range - RT ~ 120 ℃

·         Tem. Accuracy - ± 2 at 120 ℃

·         Pressure Capacity - 50 bar

·         Control Type - Hydraulic Servo Valve

·         Test Speed - Max 5 Hz

·         Cooling System - Water Cooling System

·         Motor - Hydraulic Pump

·         Leak Flow Measurement - 1 ~ 300 cc

·         Safety Device - Emergency Stop, Limit (Pressure, Over Temp.)

·         Main Power - 380 V 3 P

·         Weight - About 3 ton

Are you looking for Servo hydraulic universal testing machine? Testone one of the leading plastic testing instruments manufacturer in Korea offer various type of universal testing machine. For more details contact testone@testone.co.kr / oversea1@testone.co.kr

Testone’s Elastic Restoring Force & Load torque testing machines overview

Testone specialized testing machines manufacturer in South Korea. We offer wide range of latest technology testing machines for various field. With tech engineers who have accumulated more than 20 years of accumulated technology, we’ve been developing new products and developing new products.

Elastic Restoring Force Testing Machine

Model: TO-L-1

•         This tester is for measuring the direction of the elastic restoring force of the product.
•          It can be used to obtain a precise Data Load Cell and LVDT.
•          It is easy to apply to the data acquisition and analysis only Software.

Body specifications

•         Test methods - DC Servo motor & Driver, DV Servo & Reducer, Ball Screw x2axis & Timing Pully
•        Test load Max 10kgf x 2set
•          Test speed Max 500mm/min
•          Test stroke Max 100mm
•          Measuring sensor (LVDT) Max 20mm

Controller specification

•         Control - Axis Srepper &Servo Motion Control
•          Resolution - Angle-0.5% (within), Stroke-0.5% (within)
•          Max. Data sampling speed - Max 1kHz
•          Control Software - Testone Program

PC specification Contents of evaluation

Industrial Computer

•         CPU: G2030 (Intel, 3.0GHz) / RAM: 2GB
•          CPU Board: IMBA-Q670 (IEI)
•          Power: ST-450(Seventaem, 450W)
•          HDD: 1 TB (WD, 7200RPM)
•          ODD: DVD-Multi (Samsung)
•          Cooler: 1156C (IEI, 1U)
•          OS: windows7 Pro (DSP, 32bit)
•          Monitor: 19” LCDWIDE
•          19” PC Rack STD

Load Torque Testing Machine

·         This tester is for evaluating Compression and Torsion characteristics of the part.

·         By applying a high-precision Torque Sensor with Load Sensor, it is to obtain more precise data.

·         It is possible to easy and quick testing in the section structure.

Specification

Torque Tester

•         Torque Capacity - 500 Nm
•          Torque Accuracy - +/-0.5 %
•          Angle Accuracy - +/-0.1 %
•          Torque Test Speed - 1 ~ 30 RPM
•          Torque speed accuracy - +/- 0.1%
•          Driving System - AC Servo Moto

Compression Tester

•         Force Capacity - 50 kN
•          Load Accuracy - +/-0.5 %
•          Stroke Accuracy - +/-0.1 %
•          Max. Compression Test  Speed - 500 mm/min
•          Min. Compression Test Speed - 0.1 mm/min
•          Speed accuracy - +/- 0.1%
•          Resolution - 0.5 ㎛
•          Driving System - AC Servo Motor

If you looking for universal testing machine supplier? Contact (testone1@naver.com / testonekorea@gmail.com) Testone, one of the leading material testing instruments manufacturer in South Korea offers various type of universal testing machine.

Measure the resistance of material with Testone Impact Testing machines

Testone specialized in material testing machine manufacturing, we supply wide range of testing machine to various industrial purpose.

All TESTONE series load frames are designed to provide higher stiffness and precise alignment for testing everything from medical devices to high-strength composites. Rigid mechanical design ensures the best possible conditions for repeatable test condition and reliable results.

Auto Impact Testing Machine

Model: TO-AI-50

- Testing machine is to determine the impact strength of the material or product.

- Using high precision sensor the impact of specimen is possible to direct and the impact hammer can be easily adjusted by program.

- It is applied to the brake system for preventing the repeats impact.

Specification

·         Capacity - 50 J

·         Lift Angle - 0 ~ 175˚ (Adjustable)

·         Impact edge Type - R 0.8mm, 75˚

·         Envil Angle - ± 60˚ (Adjustable)

·         Envil Moving distance - 0~150 mm (Adjustable)

·         Brake Type - Pneumatic Type Brake System

·         Motor - AC Servo Motor

·         Control Type - Axis Stepper & Servo Motion Control

·         Control. Accuracy  - Angle: 0.1 % Distance: 0.1 %

·         Data Sampling Rate - Max 10 kHz

·         Main Power  - 20 V 2 P 60 Hz

·         Weight - About 700 kg

Drop Impact Testing Machine

Model: TO-DI-100

- The testing machine applies a repeatable impact for the evaluation of the impact properties of the product.

- Test to be dropping weight using on height of a free fall set and it is design by high-durability.

- Dedicated Software is easy to apply data analysis and management.

Specification

·         Drop Weight - 500g ~3 kg

·         Drop Height - 300 ~ 1500 mm

·         Driving System - AC Motor & Ball Screw

·         Accelommeter - Capacity: 300 g, Linearity : ± 2 %, Gauge Type : Strain gauge Type, MP: DC Method, ±5 V, Auto Balance

·         Auto driving System ( Drop height )

·         Auto Drop System (Electromagnet)

·         Data measuring System (Accelommeter)

·         Max. 10 kHz data sampling System

For more details contact testone@testone.co.kr. We also offer servo hydraulic universal testing machine, coating inspection instruments, and so on.

Testone offers reliable testing machines for Pressure & Load Torque testing

Testone a specialized testing machine manufacturer in South Korea. We offer wide range of testing machine for testing instruments/devices of various industry to ensure its strength and reliability.

Pressure Testing Machine

Model TO-HP-50

·         This tester is for evaluating the performance, using on a Pipe pressure.

·         It is proceed with the pressure maintenance and destructive testing.

·         The pressure control is easy to use the servo system

Specifications

·         Pressure Capacity - 50 bar

·         Pressure Type - Hydrostatic

·         Pressure Accuracy - ± 0.5 %

·         Sample Distance - 1,000 mm

·         Sample size - ¼” ~ 12”

·         Test methods - Burst, Holding Power

·         Control - Servo Motor Control

·         Software - Motion set-up & control, Data analyze, Save, Print.

·         Safety Device - Emergency Stop, Limit (Pressure)

·         Power - 220 V 2P 60 Hz

·         Weight - Approx. 900 kg

Load Torque Testing Machine - Model TO-L-3

·         This tester is for evaluating Compression and Torsion characteristics of the part.

·         By applying a high-precision Torque Sensor with Load Sensor, it is to obtain more precise data.

·         It is possible to easy and quick testing in the section structure.

Specification

Torque Tester

·         Torque Capacity - 500 Nm

·         Torque Accuracy - +/-0.5 %

·         Angle Accuracy - +/-0.1 %

·         Torque Test Speed - 1 ~ 30 RPM

·         Torque speed accuracy - +/- 0.1%

·         Driving System - AC Servo Motor

Compression Tester

·         Force Capacity 50 kN

·         Load Accuracy +/-0.5 %

·         Stroke Accuracy +/-0.1 %

·         Max. Compression Test

·         Speed 500 mm/min

·         Min. Compression Test

·         Speed 0.1 mm/min

·         Speed accuracy +/- 0.1%

·         Resolution 0.5 ㎛

·         Driving System AC Servo Motor

If you are looking out for plastic testing instruments manufacturer? Contact: testone1@naver.com / testonekorea@gmail.com, Testone a leading testing instruments manufacturer in Korea