Testone’s High Speed Impact & Repeated Impact Testing machine Overview

Testone a patent testing machine manufacturing company in South Korea. Our testing machines are designed to deliver greater stiffness and precise alignment for testing everything from medical devices to high-strength composites.

High-Speed Impact Testing Machine

Model: TO-HDI

This tester is to assess the interior of external components to reduce the injury of a passenger during a vehicle collision.

It is easy data analysis and management of the high speed testing machine and applying program use to the Gas N 2.

Hit points and the driving angle are designed to easy handling.

Specification

·         Impact speed - 24.1 km/hr ±0.6 km/hr

·         Impact parts (round) - Weight: 6.8 kg / Size: Diameter 165 mm / Material: AL6061

·         Impact angle - 0 ~ 90˚

·         Test methods - Shockproof test

·         Test speed - 80 g

·         Pressure - N2 or Air

·         X, Z Stage - Remote Control

·         Software - Motion set-up & control, Data analyze, Save, Print.

·         Power - 220 V 3 P or 380 V 3 P

·         Weight - Approx. 3 ton

Repeated Impact Testing Machine

Model: TO-RI-500

The tester is to the evaluation of the impact properties of the product was added to repeated impact.

Testing to be dropping weight and height setting of the free-fall and secured the durability to repeated high speed impacts.

Software is easy to apply data analysis and management.

Specification

·         Impact Energy - Impact Energy: 10~500Nm

·         Speed - 1~15cpm

·         Cycle - 5000 Cycle

·         Data category - Energy, Speed, Cycle

·         Computer Auto Control - Stoke, Cycle, Speed

·         Manual Control - Weight (Dis-adhesion)

·         Computer - Rack case (industrial)

·         Safety Device -PC door, side case, Limit programing (for specimen destruction of impact position)

·         Type - Servo Motor 1.5kw

·         Stoke (mm) - 100~600

·         Stroke Resolution - 0.01mm

·         Guide Shaft type - LM Guide

·         Impact weights - 0kgX4EA / 5kgX1EA / 1kg 5EA

·         Safety for weight - Pin Type

·         Weight Holding - Magnetic

·         Weight Lifting - Servo motor/ Magnetic rise method after main axle driving

If you are looking out for material testing instruments manufacturer? Contact TESTONE, one of the leading plastic testing instruments manufacturer, offers various universal testing machine, test chamber, testing machine for metal, rubber, film/plastic, textile, paint/pigments, and so on. For more details mail to testone@testone.co.kr

Testone’s Environmental Car Handle & Clutch-Pack Durability Testing Machine Overview

TESTONE is specialized in test equipment manufacturing company in South Korea. We delivers testing machines like universal testing machine, environmental test chamber and testing machines for motor vehicle parts, metal, rubber, film/plastic, textile, paint, also other measuring instruments.

Environmental Car Handle Testing Machine

Model - TO-I/D HDL-C

·         This tester is to evaluate the environmental durability of the car door Handle.

·         The high-accuracy and high-durability are adopted a servo motor drive system.

·         A data acquisition and analysis are facilitated by using a dedicated Software.

Specification

·         Number of test - 1,000,000 cycle

·         Test methods - Door pull test, sliding test, sliding malfunction test, Pulling malfunction test

·         Main Body - Steel Case

·         Driving System - AC Servo Motor System, AC Servo Motor Reducer (Japan), Ball Screw (Japan) Type

·         Control Motion Control, Software Displacement control, Load control Timer, count, Load, Distance & etc. Load control -Load Cell, Displacement control-Servo -Servo Motor Encoder (or potentiometer, Proximity sensor & etc.

·         Computer System - (Monitor, Main body) 19”Rack STD

·         Operation Temp - -40℃ ~ 120℃

·         Operation Humidity - 30 ~ 95 %

·         Safety Device - Emergency Stop, Limit (Load, Stroke), Power Breaker

·         Power - AC200V, 60Hz

·         Load Cell - 100kgf 5 EA

Clutch-Pack Durability Testing Machine

The tester is a high performance device designed to test the clutch durability by implementing a high response speed and adopting the hydraulic valve is a device capable of high-speed test.

Controlled by computer and can be a variety of tests to reference the various waveforms. Feedback Control method in a precise static tests, dynamic tests are available, and the user of the computer-controlled Safety and ease of use, precision, designed to increase durability

Specification

·         Test Chamber - Material: SUS304

·         Temp. Range - RT ~ 120 ℃

·         Tem. Accuracy - ± 2 at 120 ℃

·         Pressure Capacity - 50 bar

·         Control Type - Hydraulic Servo Valve (Moog 社)

·         Test Speed - Max 5 Hz

·         Cooling System - Water Cooling System

·         Motor - Hydraulic Pump

·         Leak Flow Measurement - 1 ~ 300 cc

·         Safety Device - Emergency Stop, Limit (Pressure, Over Temp.)

·         Main Power - 380 V 3 P

·         Weight - About 3 ton

If you are looking out for material testing instruments manufacturer? Contact: testone1@naver.com / testonekorea@gmail.com, Testone a patent plastic testing instruments manufacturer in Korea offers several testing equipment’s.

Testone’s Sports Mats & Gloves Box Durability Testing Machines Overview

Testone, a patent testing machines manufacturer in South Korea. We offer various industrial testing machines. TESTONE series load frames are designed to deliver higher stiffness and precise alignment for testing everything from medical devices to high-strength composites. Rigid mechanical design ensures the best possible conditions for repeatable test condition and reliable results.

Sports Mats Testing Machine

Model: TO-D109

This tester is for evaluating durability against to the restoring force of sport mats.

Applied repetitive pressure to measure deflection of the resilient mat and using a dedicated software, data acquisition and analysis are easy to management.

Specification

·         Capacity - 2 kN

·         Stroke - 50 mm

·         Software - Motion set-up & control, Data analyze, Save , Print

·         Power - 220 V 2P 60 Hz

·         Weight - Approx. 150 kg

·         Falling System (Auto)

·         Electromagnet Falling System

·         Load Cell Data System

·         Max .10 kHz Data sampling System

Gloves Box Durability Testing Machine

Model: TO-D104

This tester is for evaluating durability of the glove box damper operation.

Individually tested and glove box damper test sets are available, and Gloves box operation program designed to measure the force and duration-specific rate.

Specification

·         Control – Software, (open & shut) Measuring velocity of each section, Timer & count, PLC Control Type

·         Main body Al-profile Case

·         Software Motion set-up & control, Data analyze, Save, Print

·         Power 220 V 2P 60 Hz

·         Weight Approx. 200 kg

Are you looking for universal testing machine? TESTONE CO., LTD one of the leading material testing instruments manufacturer in South Korea, offers several type of universal testing machine, test chambers, vehicle parts, metal, paint, textile testing machines and so on. For more details contact testone@testone.co.kr

Testone’s Valve Torque Durability Testing Machine & CFRP Multistep Hot Press Overview

Testone a leading testing machines manufacturing company in South Korea. We offers various type of testing machines for different industrial purpose. TESTONE was able to grow rapidly with high technology and stable quality. Also we provide our partner with the total solution include Order Production, Programming and Software also After Sales Support.

Valve torque Durability Testing Machine

TO-D103

- This tester is to evaluate the durability of Valve torque operation.

- Precise control is possible to apply the AC Servo Motor High Precision Torque Sensor also precise data acquisition is possible.

Specification

·         Capacity 20 N.m

·         Torque Accuracy ± 0.5 %

·         Angle Accuracy ± 0.1 %

·         Test Speed - 60 RPM

·         Main body - Al-profile Case

·         Counter - 0~999999

·         Control - Digital Servo Controller Axis, Stepper & Servo Motion Control

·         Software - Motion set-up & control, Data analyze, Save, Print

·         Power - 220 V 2P 60 Hz

·         Weight - Approx. 600 kg

CFRP Multistep Hot Press

TO-MP-4

The temperature and pressure of the testing machine Press at intervals of 4 to Multi Step Hot Press, It is possible to set the time arbitrarily also sample is equipped with an automatic Belt conveyor for driving in machine.

- The temperature of each segment using only S / W, pressure and time can be set for each section, and it analyze the progress data.

- The accuracy of the available pressure is increased by the Hydraulic Servo Valve also heating plate is to minimize temperature variation for consists of a Multi zone control system.

Specification

·         Pressure Capacity - 50 ton

·         Pressure Zone - 4 Step Zone

·         Heating Plate - 1500 X 1200 mm

·         Tem. Range - RT ~ 450 ℃

·         Tem. Control - Multi Zone Control

·         Tem. Accuracy - ± 5 at 450 ℃

·         Specimen driving System - Auto

·         Feeding rate - 5 sec (Section)

·         Motor - Hydraulic Pump

·         Cooling System - Water Cooling System

·         Main Power - 380 V 3 P

·         Weight - About 8 ton

Are you looking for material testing instruments manufacturer? We offers various material testing instruments like Universal testing machine, test chamber, testing machine for metal, rubber, film/plastic, textile, paint/pigments, and so on. For more details contact us testone1@naver.com 

Testone’s Servo Hydraulic Fatigue Testing Machine & Spring Fatigue Testing Machine Overview

TESTONE is expert in test equipment manufacturing such as U.T.M, Environment Chamber and etc. With the best technician more 20 years career and constant technical developing efforts. We have supply mainly to universities in Korea and big Korean companies such as Samsung, LG, LS, Hyundai, TUV Korea, etc.

Servo-Hydraulic Fatigue Testing Machine

Model TO-F100 Series

Servo-hydraulic systems are the workhorse of any laboratory. It can perform a wide variety of low and high cycle fatigue, crack propagation, fracture toughness and other dynamic tests. Each system can be readily configured with appropriate sized servo valve, manifold and hydraulic power unit to suit the particular application.

Specification

·         Capacity -1 kN ~500 kN
·         Test methods - Cycle test, fatigue test, tensile test, compress ion test
·         Wave form - Sine wave, Square wave & etc.
·         Excitation frequency - 0.1 ~ 100 Hz (Order production)
·         Amplitude of vibration - Order production
·         Accuracy of Load - ± 0.5 % F.S
·         Accuracy of displacement - ± 0.1 % F.S
·         Mode - Hydraulic servo valve
·         Cooling system - Water cooling system

Spring Fatigue Testing Machine

Mode TO-F100S

This tester is for evaluating the repeated fatigue resistance to a vehicle clutch spring jet. - A precise control is possible to using the AC Servo Motor and micro-heads.

Specification

·         Capacity - 3 kgf
·         Test speed - 0.1 ~ 60 Hz
·         Number of test - 0~10,000,000 cycle
·         Amplitude of vibration - ±0.1 ~ 15 mm
·         Amplitude of resolution - 0.01 mm
·         Control accuracy - ± 0.1 % F.S
·         Motor - AC Servo Motor
·         Method - CAM Driving system
·         Power - 220 V 2 P
·         Weight - Approx. 200 kg

Are you looking for Servo hydraulic universal testing machine? Testone one of the leading plastic testing instruments manufacturer in Korea offer various type of universal testing machine. For more details contact testone@testone.co.kr / oversea1@testone.co.kr